37.Wrap the Rear Cable (95) around a 3 1/2” Pulley (15). Attach the Pulley to the bracket on the Stabilizer (5) with a 3/8” x 1 3/4” Bolt
(87)and a 3/8” Nylon Locknut (21).
38.Wrap the Rear Cable (95) around a 3 1/2” Pulley (15). Attach the Pulley to the indicated bracket on the Top Frame (55) with a 3/8” x
1.3/4” Bolt (87) and a 3/8” Nylon Locknut (21).
The Cable must be routed from the direc- tion shown.
CABLE ASSEMBLY
39.Attach the Rear Cable (95) to a Small “U” Bracket (67) with a 1/4” Nylon Locknut (2)
and a 1/4” Washer (10). Do not completely
tighten the Nylon Locknut. It should be threaded onto the end of the Cable only a couple of turns, as shown in the inset drawing.
Attach the Small “U” Bracket (67) to the indi- cated Weight Tube (63) with a 5/16” x 1 3/4” Bolt (72) and a 5/16” Nylon Locknut (3).
17
37 |
|
|
|
| 95 | 15 |
|
|
|
| |
| 87 |
|
|
|
| 5 | 21 |
38 |
|
|
|
| 87 |
|
|
|
| 55 | 21 |
|
| 15 |
|
|
| 95 |
|
39 |
| 95 | 3 |
|
|
| |
|
| 67 |
|
| 72 | 10 | |
|
|
| 2 |
| 63 |
|
|
67 | 95 |
|
|
|
|
| |
| 10 |
|
|
| 2 |
|
|