ADJUSTMENT

The instructions below describe how each part of the home gym system can be adjusted. Refer to the exercise poster accompanying this manual to see how the home gym system should be set up for each exercise.

IMPORTANT: When attaching the lat bar or nylon strap, make sure that the attachments are in the cor-

rect starting position for the exercise to be performed. If there is any slack in the cables or chain as an exercise is performed, the effectiveness of the exercise will be reduced.

CHANGING THE WEIGHT SETTING

To change the weight setting of either weight stack, insert a Weight Pin (26) under the desired Weight (25). Be sure to insert the Weight Pin until the bent end of the Weight Pin is touching the Weights, and turn the bent end downward. The weight setting of the weight stack can be changed from 6.5 pounds to

106.5 pounds, in increments of 12.5 pounds.Note:

Due to the cables and pulleys, the amount of resistance at each exercise station may vary from the weight setting. Use the WEIGHT RESISTANCE CHART on page 24 to find the approximate amount of resistance at each weight station.

ATTACHING THE LAT BAR OR NYLON STRAP TO

THE HIGH PULLEY STATION

Attach the Lat Bar (54) to the High Cable (23) with a Cable Clip (53). For some exercises, the Chain (52) should be attached between the Lat Bar and the High

Cable with two Cable Clips.

Adjust the length of the

Chain between the Lat Bar and the High Cable so

the

Lat Bar is in the correct starting position for

the

exercise to be performed.

 

The Nylon Strap (39) can be attached in the same manner.

ATTACHING THE LAT BAR OR NYLON STRAP TO

THE LOW PULLEY STATION

Attach the Lat Bar (54) to the Low Cable (86) with a Cable Clip (53). For some exercises, the Chain (52) should be attached between the Lat Bar and the Low

Cable with two Cable Clips.

Adjust the length of the

Chain between the Lat Bar and the Low Cable so

the

Lat Bar is in the correct starting position for

the

exercise to be performed.

 

The Nylon Strap (39) can be attached in the same manner.

25

 

 

26

 

39

 

53

 

23

 

52

 

54

 

39

 

52

86

53

 

 

54

22

 

Page 22
Image 22
Weider WESY97300 Adjustment, Changing the Weight Setting, Attaching the LAT BAR or Nylon Strap to High Pulley Station