FRAME ASSEMBLY
3. Press a 2” Square Inner Cap (27) into the | 3 | |
Rear Upright (56). |
| |
| High Side of | |
|
| |
Attach a Rubber Bumper (90) to the Rear | Bracket | |
| ||
Upright (56) with a #8 x 1/2” Tap Screw (89). |
| |
Slide the Rear Upright (56) onto the 5/16” x | 89 | |
2 1/2” Carriage Bolts (1) in the Rear Base |
| |
(51). Hand tighten a 5/16” Nylon Locknut (3) | 90 | |
onto each Carriage Bolt. | The high side of |
|
the bracket on the Rear Upright must be |
| |
on the side shown. Do not tighten the | 27 | |
Nylon Locknuts yet. |
| |
|
| |
|
| 56 |
|
| 3 |
|
| 51 |
|
| 1 |
4. Press a 1” Square Inner Cap (65) into the | 4 | |
Front Upright (42). |
| |
|
| |
Slide the Front Upright (42) onto the 5/16” x |
| |
2 1/2” Carriage Bolts (1) in the Front Base |
| |
(4). Hand tighten a 5/16” Nylon Locknut (3) |
| |
onto each Carriage Bolt. | Do not tighten the |
|
Nylon Locknuts yet. |
|
|
|
| 42 |
|
| 65 |
|
| 3 |
|
| 4 |
|
| 1 |
6
