FRAME ASSEMBLY
5.Set two Weight Bumpers (19) onto one of the brackets on the Stabilizer (5). Insert two Weight Guides (62) through the Weight Bumpers and the bracket on the Stabilizer.
Be sure that the drilled holes in the Weight Guides are at the top, as shown. Press a 1” Round Cover Cap (70) onto the bottom of each Weight Guide.
Slide eight Weights (25) onto the Weight
Guides (62). Be sure that all of the Weights are turned so the pin grooves are on the
same side.
Assemble the other stack of Weights (25) in the same manner.
6.Press a Weight Tube Bumper (64) into the end of a Weight Tube (63). Insert the Weight Tube into either stack of Weights (25). Be sure that the pins on the Weight Tube are resting in the pin grooves in the upper Weight.
Lubricate the insides of the holes in a Top Weight (76). Slide the Top Weight onto the Weight Guides (62) and set it on the stack of Weights (25).
Assemble the other Weight Tube (63) and Top Weight (76) in the same manner.
7
5 |
|
| Drilled holes |
|
|
| |
|
|
| must be at |
|
|
| the top |
|
|
| 62 |
|
|
| Pin Grooves |
|
|
| must be on |
62 |
|
| this side |
|
|
| |
|
|
| 25 |
Pin Grooves |
|
|
|
must be on |
|
|
|
this side |
|
| 19 |
|
| 70 | 5 |
|
|
| |
|
|
| 70 |
25 |
|
|
|
6 |
|
|
|
|
|
| 62 |
|
|
| Lubricate |
|
|
| 76 |
| 63 |
| Pins |
|
|
| |
|
|
| 64 |
|
|
| 25 |
63 |
|
|
|
76 |
|
|
|
| 25 |
|
|
