![](/images/new-backgrounds/1256961/25696157x1.webp)
IVX | Function 5: Voice mail programming |
Function 56: Cascade notification mailboxes
Note: Not available on IVX
In addition to individual mailbox paging, IVX
Cascade mailbox options
The user can program up to three external numbers, of up to 24 digits each, to be called or paged whenever the mailbox takes a new or urgent message. The system will dial the first number (for the number of times listed), then dial the second paging number (for the number of times listed), and finally dial the third number, continuing in this sequence to call all three numbers until the message has been retrieved.
1. | 2. | 3. | 4. | 5. | 6. | 7. | 8. | 9. |
MB | 1st Number | Type | Attempts | 2nd Number | Type | Attempts | 3rd Number | Type |
520 | 2145553232 | PHONE | 2 | 2145554254 | PHONE | 3 | 2145555452 | PAGER |
|
|
|
|
|
|
|
|
|
To program this, enter:
1.The mailbox number — Range:
2.First number — The number to be dialed (without the CO line group).
3.Type — PHONE or PAGER. Use scroll keys to select.
4.Attempts — How many times the system will call before adding the second number. Range:
5.Second number — The number to be dialed (without the CO line group).
6.Type — PHONE or PAGER. Use scroll keys to select.
7.Attempts — How many times the system will call before adding the third number. Range:
8. Third number — The number to be dialed (without the CO line group).
9.Type — PHONE or PAGER. Use scroll keys to select.
Note: Use the scroll key to enter special characters; use the scroll key to backspace. Press # to confirm the inserted character and continue. Press # # to complete the entry.
To change the number, delete and then
Cascade notification parameters
The cascade notification mailboxes will use the same CO line group and pager dialing pause as programmed in Function 552 (see page D.4).
Notification interval
To program the notification interval parameter for a cascade notification mailbox:
1.Enter the mailbox number
2.Press 2 to set parameters for the mailbox.
3.Enter the number of minutes for the interval between attempts. Range:
Note: Once you change this setting from 0, you cannot reset it to 0.
D.5