Westell Technologies IVX S-Class manual Function 373 View Rfid tag number, Rfid TAG Display EXT

Function 3: Extension programming IVX S-Class Administrator’s Manual

Function 373: View RFID tag number

This is used to display tag numbers that are associated to extensions or mailboxes. You can only view tag numbers with this function. You cannot change any tag numbers or assignments.

Enter the station or mailbox number to display, and then press #. If there’s an RFID tag number assigned to that extension or mailbox, it will appear.

RFID TAG DISPLAY

EXT:

Tip: You can use Esi-Accessor Esi-Adminto print out a list of assigned tag numbers.

Function 374: ESI Presence Management parameters

Playing prompts

This determines whether the system plays a prompt — and, if so, which one — when the ESI Presence Management RFID Reader reads an electronic key. Select YES to enable playing of the prompt or NO to disable playing of the prompt.

Default: YES (a prompt will play).

EPM RFID READER

PROMPTS: YES >

When this function is set to NO, no prompts will play through the ESI Presence Management RFID Reader. When “EPM RFID Reader prompts” is set to YES, prompts will play as shown below. (These prompts can’t be customized.)

When the RFID Reader displays:	It plays this prompt:
WELCOME	“Welcome”
GOODBYE	“Goodbye”
ACCESS DENIED	“Invalid Entry”
LICENSE EXCEEDED	“Error”
ERROR	“Error”
READER FULL

Enable/disable sending time and attendance records

Notes: The NSP must be programmed and connected to a local area network for time and attendance record collection.

Only ESI Presence Management RFID Readers programmed as type ENTRANCE/EXIT (Function 31) generate time and attendance records.

This parameter is used when the optional ESI TimeLine time and attendance management software application is used in conjunction with the ESI Presence Management RFID Reader.

Use the scroll keys to enable or disable time and attendance records, and press # to confirm. Default: Disabled.

C.6