![](/images/new-backgrounds/1256961/25696121x1.webp)
IVX | Administrator programming: An introduction |
Remote setting of day, night, holiday and auto modes
Normally, the system’s day/night mode operation will be manually controlled at an ESI Feature Phone and/or set to follow the day/night mode tables (programmed by the Installer) automatically. In addition, the Administrator can remotely change the mode and/or
Remotely logging into the system with the Administrator password lets the caller
1.At the main greeting, enter 4 5 6 # — or [the new password] # — to enter remote programming mode.
2.You’ll hear prompts that will allow you to change the answer mode (day, night, holiday, or auto) and/or to
3.Exit by pressing and hanging up.
Prompts for remote settings: an outline
1Set answer mode
1 Day mode
2 Night mode
3 Holiday mode
4 Use day/night table*
2Record holiday main greeting
3Record daytime main greeting
4Record nighttime main greeting
Note: If the system is answered live and call is then routed to a mailbox., the Administrator can press 8 to return to the main greeting and then follow the steps for making remote settings.
*This is used if the Installer has programmed an automatic calendar.
A.7