Western Telematic NPS-2HD manual Mrmaio, Displaying Plug Status

NPS-2HDHeavyDutyNetworkPowerSwitch;User'sGuide

6.2. Displaying Plug Status

The Status Screen displays the On/Off state and selected parameters for the switched plugs. To display the Status Screen, type /S and press [Enter]. Note that although the /S command is available in both User and System Mode, the System Status Screen includes more information than the User Status Screen.

When the System Mode is active, the /S command will produce the screen shown in Figure 6.1, which lists status and parameters for both switched plugs, along with Console Port parameters, and modem command strings. Note that in System Mode, the /S command will also accept an argument which will display the User Password for each plug. To display plug passwords, access the Syst m Mode, type /SP and press [Enter]

Mrmaio	Status	(defined)
When the User Mode is active,		he /S command will produce a

different version of the atus screen, which lists the status and paramet s only for the plug(s) owned by the User password entered at login. If a separate User Password has been assigned

to the ther plug, the User Mode St tus Scre		will not list the
status for	hat plug. In User mode, plug passwords cannot be
	ON15Sec--------FFMinSite:+------------WESTERNBootDelayPasswordTELEMATIC,+------------------INC.	+-------ONDefault--
ACommadDiscoMdemNetworkPlug------displayed21omatonuicaiInit+DiscROUTERe------------------ConfEhPowrSwitchv1Nam.TmeoueString:de:.SePOWERt:ngs:BA.00+9600,N,8,130+++ATZATEM0Q1&C1&D2S0=1
ButMod:	O
Figure"/H"for6.1:HelpSystemStatusScreen(PasswordsHidden)
6-2