1023583 Hose Kit
Install Hydraulic Fittings and Hoses
1.Locate the hydraulic ports on the rear of the trac- tor.
2.Remove tube and fittings from the PBY, PRESSURE, and RETURN ports shown in Figure 45.
3.Install adapter (4) in the PBY port, adapter (3) and elbow (5) in the RETURN port and elbow (6) in the PRESSURE port.
4.Attach straight end of hose (1) to the PBY port on the control valve.
5.Attach 90° end of second hose (1) to the OUT port on the control valve.
6.Attach one end of hose (2) to the IN port on the control valve.
7.Route hoses under right side of platform, over right rear axle and out the back of the tractor.
8.Attach straight end of hose (1) from the OUT port on the control valve to the elbow (5) in the RETURN port on the back of the tractor.
9.Attach end of hose (2) from the IN port on the control valve to the PRESSURE port on the back of the tractor.
10.Attach 90° end of hose (1) from the PBY port on the control valve to the PBY port on the back of the tractor.
1.1002862 Hose, 120" x 3/4 JICF x 3/4 JICF 90°
2.1023496 Hose, 120" x 3/4 JICF x 7/8 JICF
3.1010920 Adapter, M22 x 1.5P x 3/4 JICM
4.44426 Adapter, M18 x 1.5P x 3/4 JICM
5.313032 Elbow, 3/4 JICM x 3/4 JICF 90°
6.46054 Elbow, 7/8 JICM x 7/8 JICF 45°
RETURN | PRESSURE |
| PBY |
| Tube |
| DP3 |
Figure 45. Tractor Hydraulic Connections
RETURN | 6 |
PRESSURE
5 | 1 |
|
1
DP11
PBY
1
Figure 46. Hydraulic Fittings and Hose Connections
Figure 47. Hydraulic Fittings and Hose Installation
MAN0041 (Rev. 4/4/2008) | Hydraulic Installation 25 |
|
|
