July 2006 | Connecting peripheral devices to the 201i server |
To connect the
1Connect the first SCSI device.
2Follow instructions below:
IF the first |
|
device is the | THEN |
|
|
do the following: | |
| a. Attach the A0769312 SCSI adapter to the |
| |
| b. Connect the NTRH3502 SCSI cable that you |
| installed earlier on the Succession 1000 Media |
| Gateway or Media Gateway Expansion to the SCSI |
| adapter on the |
|
|
tape drive | connect the NTRH3502 SCSI cable that you installed |
| earlier on the Succession 1000 Media Gateway or |
| Media Gateway Expansion to the tape drive. |
3Connect an additional device in a daisy chain if required, using either the SCSI cable supplied with the device or an NTRH3502 cable.
201i Server Hardware Installation | 149 |
