Nortel Networks CalPilot 4.0 manual 201i Server Hardware Installation 147

July 2006 Connecting peripheral devices to the 201i server

To connect the CD-ROM and tape drives to the 201i server (Option 11C Mini)

1Connect the first SCSI device.

2Follow instructions below.

IF the first
device is the	THEN
CD-ROM drive	do the following:
	a. Attach the A0769312 SCSI adapter to the CD-ROM
	drive.
	b. Connect the NTRH3502 SCSI cable that you
	installed earlier on the Option 11C Mini to the SCSI
	adapter on the CD-ROM drive.
tape drive	connect the NTRH3502 SCSI cable that you installed
	earlier on the Option 11C Mini to the tape drive.

3Connect the low-profile right-angle SCSI cable connector to the SCSI connector on the 201i server faceplate

4Connect an additional device in a daisy chain, if required, using either the SCSI cable supplied with the device or an NTRH3502 cable.

The following diagram shows cable connections, where the CD-ROM drive is the first device:

201i Server Hardware Installation 147