Nortel Networks CalPilot 4.0 manual Installing the Scsi cables for Meridian, Cables you need

July 2006 Installing the 201i server in a large Meridian 1 system

Installing the SCSI cables for Meridian 1

Introduction

Before you can connect a CD-ROM or tape drive to the 201i server, you must install the SCSI cables. The SCSI cables route the SCSI connection away from the 201i server faceplate so that an external SCSI device can remain permanently connected.

CAUTION

Risk of equipment damage

You must power off the 201i server before connecting or disconnecting SCSI cables.

Cables you need

You require the following cables:

„NTRH1408 (for connecting the 201i server to the Meridian 1 I/O panel)

201i Server Hardware Installation 63