Preparing peripheral devices | Standard 1.03 |
Setting the modem DIP switches
Introduction
Set the modem DIP switches to their default settings. This section describes how to set the modem DIP switches if they have been changed from the default settings.
To set the modem DIP switches
Ensure that the DIP switches are set as described in the following table. Use a pair of tweezers or small screwdriver to set the DIP switches.
Note: The DIP switches are located on the back of the modem. ON is down. OFF is up.
DIP Default
switch setting Function
1 | OFF | Data Terminal Ready (DTR) override |
OFF: Normal DTR operations (The computer must provide a DTR signal for the modem to accept commands. When DTR is dropped, the call is terminated.)
ON: Modem ignores DTR (override)
2 | OFF | Verbal/numeric result codes |
OFF: Displays verbal (word) results
ON: Displays numeric results
3 | ON | Result code display |
OFF: Suppresses result codes
ON: Enables result codes
122 | CallPilot |
