Nortel Networks CalPilot 4.0 Unpacking and inspecting the 201i server, To unpack the 201i server

July 2006 Preparing for installation

Unpacking and inspecting the 201i server

Introduction

This section describes how to:

„unpack the 201i server and peripherals

„inspect the 201i server for damage

It also describes what to do if you determine that the 201i server is faulty.

To unpack the 201i server

ATTENTION
	As you unpack each item, check it off against the
	packing list, as well as the following checklists provided
	in the CallPilot Installation and Configuration Task List:
	„ “CallPilot software media and documentation checklist”
	„ “CallPilot server hardware checklist”

1Remove the 201i server from the carton and its antistatic bag.

2Place the 201i server on an antistatic surface.

3Carefully open the cartons containing the monitor, keyboard, mouse, modem, and ELAN hub (if supplied), and set the peripherals aside.

4Put all manuals and CD-ROMs in a safe place.

5Save all packing materials and cartons in case you must return any equipment to the carrier.

6Review “201i server description” on page 14, and perform a visual inspection as described in “To inspect the 201i server for shipping damage” on page 40.

201i Server Hardware Installation 39