Connecting peripheral devices to the 201i server

Standard 1.03

Result: The operating system boot sequence begins, and communication with the switch occurs. The HEX display shows NT (for about 30 seconds), followed by OK.

Note: The system reboots more than once. The HEX display repeats with each reboot.

Note: Before OK appears, one of the following messages can appear,

but not for more than one second: CDLN, C:01, or C:02. This is normal operation.

If OK does not appear, refer to the CallPilot server maintenance and diagnostics guide for your server for troubleshooting instructions.

158

CallPilot

Page 158
Image 158
Nortel Networks CalPilot 4.0 manual CallPilot