About the 201i serverStandard 1.03
Faceplate feature | Description |
|
|
Network and drive | The E and C LEDs indicate the presence of network |
activity LEDs | activity for both the ELAN and CLAN interfaces |
(labeled as E, C, I, and S) (respectively). When they are lit, they indicate that the
| interfaces are properly attached to their respective |
| hubs. When the LEDs are blinking, there is network |
| activity. |
| When the I and S LEDs are lit, it means that the IDE |
| hard drive and SCSI device are being accessed. |
|
|
Reset button | The reset button allows you to manually restart the 201i |
| server without disconnecting it from the backplane. |
| ATTENTION |
| Before you press the reset button, you must shut down |
| the operating system. Press the reset button while the |
| operating system is running only when you cannot shut |
| down the operating system normally. |
|
|
20 | CallPilot |
