Installing the 201i server in a large Meridian 1 system | Standard 1.03 |
To install the SCSI cables for Meridian 1
1Thread the SCSI connector end of the NTRH1408 cable from the front of the Meridian 1 along the bottom of the shelf to either the left or the right access channel.
2Leave the
Note: The following diagram shows what the connection looks like after the cable is connected:
201i server |
Intermediate |
SCSI cable |
NTRH1408 |
Access channels |
to rear of cabinet |
G101556 |
3Thread the cable through the access channel to the back of the Meridian 1.
4Attach the NTRH1408 cable to the inside of the I/O panel slot associated with the 201i server right slot.
5Connect the NTRH1410 cable to the NTRH1408 cable connector on the I/O panel.
66 | CallPilot |
