Preparing for installation | Standard 1.03 |
Switch and network requirements
Introduction
The information in this section will help you plan your 201i server installation.
Meridian 1 or Succession 1000 slot requirements
The 201i server occupies physical and electrical slots.
Note: You can place the unit in Slot 9 of an Option11C as the unit can function from slots 9 and 10. Do not place the unit in slot 10. Even though the unit can physically fit, there is no electrical connection on the backplane to slot 11.
You must install the 201i server in two peripheral equipment slots as follows:
Switch | Slots |
|
|
Meridian 1 tiered | 0 through 14 |
systems | Ensure that both slots have electrical backplane |
| |
| connectivity. |
|
|
Option 11C | 1 through 9 in any Option 11C cabinet |
|
|
Option 11C Mini | A pair of consecutive slots in any cabinet |
| Note: You cannot install the 201i server in slots 0 or |
| 4 because these slots are dedicated to other cards. For |
| more information about cards and slots, refer to the |
| Option 11C Mini documentation. |
42 | CallPilot |
