Installing the 201i server in the Succession 1000 system | Standard 1.03 |
2Remove the inside front cover plate as follows:
A |
|
C | B |
| G101621 |
a.Use a screwdriver to loosen each screw on the top of the inside front cover plate by three turns.
ATTENTION | Do not remove the screws. |
|
b.Apply pressure and slide the inside front cover plate upward to the left until the screw holes are aligned with the screw heads.
c.Pull the inside front cover plate away from the Media Gateway or Media Gateway Expansion.
What’s next?
Continue with “Installing the 201i server” on page 105.
104 | CallPilot |
