Nortel Networks CalPilot 4.0 Installing the NTRH3502 Scsi cable for Option 11C Mini, Introduction

Installing the 201i server in an Option 11C or Option 11C Mini Standard 1.03

Installing the NTRH3502 SCSI cable for Option 11C Mini

Introduction

Before you can connect a CD-ROM or tape drive to the 201i server, you must install the NTRH3502 SCSI cable. The NTRH3502 SCSI cable routes the SCSI connection away from the 201i server faceplate so that an external SCSI device can remain permanently connected.

If the Option 11C Mini is equipped with a Fiber Routing Guide (consisting of a spool and mounting bracket), you must remove it before you can install the NTRH3502 SCSI cable, and then reinstall it when you are finished.

For detailed instructions on removing and installing the Fiber Routing Guide, refer to the Option 11C and Option 11C Mini Expansion Guide (NTP 553-3021-208).

What the completed installation looks like

The following diagram shows how the intermediate SCSI cable, CD-ROM drive, and tape drive are connected to the Option 11C Mini. In the diagram, the CD-ROM drive is the first device. The tape drive is the last device.

84 CallPilot