Nortel Networks CalPilot 4.0 specs

July 2006Connecting peripheral devices to the 201i server

Selecting the procedure for your switch

IF you are working with	THEN see

a large Meridian 1 switch	“To connect the CD-ROM and tape drives
(such as Option 51)	to the 201i server (Meridian 1)” on page
	143.

Option 11C	“To connect the CD-ROM and tape drives
	to the 201i server (Option 11C)” on page
	145.

Option 11C Mini	“To connect the CD-ROM and tape drives
	to the 201i server (Option 11C Mini)” on
	page 147.

Succession 1000	“To connect the CD-ROM and tape drives
	to the 201i server (Succession 1000)” on
	page 149.

To connect the CD-ROM and tape drives to the 201i server (Meridian 1)

Note: If you are connecting the SCSI devices to the Option 11C, go to page

145.If you are connecting the SCSI devices to the Option 11C Mini, go to page 147.

1Connect the first SCSI device.

2Follow instructions below:

IF the first device is the	THEN

CD-ROM drive	connect the CD-ROM drive to the
	NTRH1410 cable that you connected earlier
	to the Meridian 1 I/O panel.

201i Server Hardware Installation

143