Installing the 201i server in a large Meridian 1 system

Standard 1.03

Installing the NTRH3501 backplane cable

Introduction

You must connect the backplane (tip and ring) cable supplied with the 201i server (NTRH3501) for 100Base-T Ethernet CLAN operation. This cable offers more network throughput than the cable you just removed from the Meridian 1.

When installed, this cable completes the connection between the left slot, the I/O panel on the rear of the switch, and the multi I/O cable on the 201i server.

Backplane (tip and ring) cable

The following diagram shows the NTRH3501 backplane (tip and ring) cable:

Backplane (tip and ring) cable NTRH3501

UP 1

UP 2

UP 3

G101546

60

CallPilot

Page 60
Image 60
Nortel Networks CalPilot 4.0 manual Installing the NTRH3501 backplane cable, Introduction