Connecting peripheral devices to the 201i serverStandard 1.03
IF you are installing the |
|
201i server in a | THEN |
|
|
Option 11C Mini or | ensure that the |
Succession 1000 | on the multi I/O cable (NTRH0912) is |
| connected to the |
| associated with the left slot occupied by the |
| 201i server. |
Note: Ensure that the cable is securely fastened.
2If you have not already done so, connect the amphenol connector drain wire as follows:
Option 11C or Meridian 1 to the nearest backplane grounding bolt on the switch
The following diagram shows drain wire connection on the Option 11C.
Multi I/O cable |
NTRH0912 |
Drain wire |
G101552 |
152 | CallPilot |
