Installation
Mounting on Poles or Rails
To mount the unit using poles:
1.Ensure that poles or rails are securely assembled in place. If using horizontal rails, two rails are required: one for the mounting bracket and another for securing the bottom edge of the inverter (see Figure
2.Connect the mounting bracket vertically to the pole or rail:
•Be sure to use at least two bolts to secure the bracket to the support.
•Position the lower edge of the bracket a minimum of 130 cm (51 inches) above the floor or ground.
•Position the top edge of the bracket a minimum of 34 cm (13.5 inches) below any ceiling or roof.
3.If using a single vertical pole, ensure that the inverter is secure and unable to rotate around the pole.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| Mounting Bracket | 34 | cm |
|
| ||||
|
|
| (13.5”) |
|
| ||||||
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
At least 2 bolts to | 46 cm | |
secure bracket to | ||
(18”) | ||
poles/rails. | ||
|
130 cm | For securing |
|
(51”) |
| |
the bottom of |
| |
|
| |
| the inverter | 100 cm |
|
| |
|
| (39”) |
Ground/Floor
Figure