Xantrex Technology GT 2.5-DE, GT 3.8-DE, GT 2.8-SP, GT 3.8-SP manual 45

	Communications Wiring for Multiple Inverters
Terminators	Male network terminators (Figure 3-7) are required at both ends of the network to
	ensure the communication signal quality on the network. Your GT Inverter comes
	with one network terminator pre-installed.

	Figure 3-7Male Network Terminator
GT Inverter Xanbus	Two RJ45 ports are provided on the GT Inverter for making network connections.
ports	See Figure 3-8for the location of these ports.
	Multi-Contact DC connectors	Binder AC connector

RJ11 ports	RJ45	RS-232 port (used to connect a PC to
		use GT-View. See page 3–12.)
(not used)	Xanbus ports

Figure 3-8Location of Xanbus RJ45 Ports

975-0253-01-01 3–9