Monitoring the Inverter
Offline messages | Additional message screens can be viewed when the system is offline by tapping | ||||
for all systems | the Xantrex logo near the LCD. Each additional tap displays the next screen, in | ||||
|
|
| |||
| These message screens are common to all GT Inverter systems, no matter how | ||||
| many units are installed. If you continue to tap the unit, then the LCD will | ||||
| continue to cycle through all of the available offline mode screens. | ||||
| Table | Offline Mode Screens for All GT Inverters | |||
| Tap |
| Display* |
| Description |
|
|
| |||
|
|
|
|
|
|
| 1st time |
| Inverter |
| LCD back light turns on for better readability |
|
|
| Offline |
| and default Offline Mode screen is displayed. |
|
|
|
|
|
|
| 2nd time |
| System 0W |
| Power being produced by the system now. |
|
|
| Today 2.50kWh |
| Cumulative energy produced by the system |
|
|
|
|
| today. |
|
|
|
|
|
|
| 3rd time |
| System Lifetime |
| Lifetime energy produced by the system. |
|
|
| 305kWh |
|
|
|
|
|
|
|
|
| 4th time |
| Time Online |
| Total time that the system was online today, in |
|
|
| hh:mm:ss |
| hours (hh), minutes (mm) and seconds (ss). |
|
|
|
|
|
|
*In a multiple unit system with network cables properly installed, the system values displayed are for the entire system. Time online is for the local inverter.
Additional Offline messages for multiple unit systems
Multiple unit systems in offline mode display all of the message screens shown in Table
These screens are only displayed when multiple GT Inverters are connected by network cables. If you continue to tap the unit, then the LCD continues to cycle through all of the available offline mode screens.
Table
Tap | Display | Description |
|
|
|
5th time | Unit 0W | Power being produced by this unit now. |
| Today 1.25kWh | Cumulative energy produced by this unit today. |
|
|
|
6th time | Unit Lifetime | Lifetime energy produced by this unit. |
| 150kWh |
|
|
|
|