4To pry the separation pad up from the spring-loaded base, insert a flat-edged screwdriver in the slot under the separation pad and twist until the tabs are free.

5Reach in through the opening, push the spring-loaded base down with one hand, and pull the separation pad up with the other hand.

6With one hand, position the new separation pad in the slot of the previous separation pad (A). With the other hand, reach through the input tray opening, and push the spring-loaded base down (B).

Note

The tab on the right is larger to help you position it correctly.

ENWW

Changing the printer separation pad 97

Page 105
Image 105
Xerox 1150, 1300 series manual Tab on the right is larger to help you position it correctly