Print server status light

The status light on the back of the print server can indicate problems with the print server. Use the table below to interpret the print server status light.

Print server status light

Light behavior

Description

 

 

Off

The print server is not receiving power.

 

 

On (solid green)

The print server is on and ready.

 

 

Blinking slowly (amber)

An error occurred during a self-test or operation. Disconnect and reconnect

 

the print server. If the problem still exists, reinstall the print server software.

 

 

Blinking slowly (green)

The print server is receiving power, but it is not ready, or a self-test might be

 

in progress. Wait for the light to turn solid green.

 

The print server might have lost its connection to the network. Check the

 

10/100 link lights, which are located near the network connection. If the 10

 

and 100 link lights are both off, there is no network connection.

 

 

Blinking quickly (green)

The print server is processing the configuration page. Wait until the

 

configuration page finishes.

 

 

Flashing intermittently (green)

The print server is on and ready, and there is activity on the network.

 

 

ENWW

Troubleshooting the print server 147

Page 155
Image 155
Xerox 1150, 1300 series manual Print server status light Light behavior Description