Labels

Label construction

When selecting labels, consider the quality of the following components:

Adhesives: The adhesive material should be stable at 200° C (392° F), the printer’s maximum temperature.

Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets that have spaces between the labels, causing serious jams.

Curl: Prior to printing, labels must lie flat with no more than 13 mm (0.5 in.) of curl in any direction.

Condition: Do not use labels with wrinkles, bubbles, or other indications of separation.

Transparencies

Transparencies must be able to withstand 200° C (392° F), the printer’s maximum temperature.

ENWW

Guidelines for using media 117

Page 125
Image 125
Xerox 1150, 1300 series manual Labels, Transparencies, Label construction