7Snap both sides of the separation pad firmly into place.

CAUTION

Make sure that the separation pad is straight and that there is no space between the separation pad

 

and the spring-loaded base. If the separation pad is not straight or you see space on one side,

 

remove the separation pad, make sure that the larger tab is on the right, reinsert the separation pad,

 

and snap both sides into place.

 

 

8Reinsert the pickup roller, print cartridge, and input trays. Plug the printer in to turn it back on.

98 Chapter 6

ENWW

Page 106
Image 106
Xerox 1300 series, 1150 manual Snap both sides into place