CDI MAGNETO ENG

REMOVAL POINTS

Rotor

1.Remove:

●Rotor nut 1

●Washer 2

NOTE:

●Loosen the rotor nut while holding the rotor with sheave holder 3.

●Do not allow the sheave holder to touch the projection on the rotor.

Sheave holder:

YS-1880-A/90890-01701

2.Remove:

●Rotor 1

●Woodruff key

NOTE:

●Use the flywheel puller 2.

●Center the flywheel puller over the rotor. Make sure after installing the holding bolts that the clearance between the flywheel puller and the rotor is the same everywhere. If necessary, one holding bolt may be turned out slightly to adjust the flywheel puller’s position.

CAUTION:

Cover the crankshaft end with the box wrench for protection.Flywheel puller:YU-33270-B/90890-01362

4 - 40