INSP

ENGINE OIL REPLACEMENT ADJ

(Except for USA and CDN)

Recommended oil:

Refer to the following chart for selection of oils which are suited to the atmospheric temperatures.

Recommended engine oil classi- fication:API STANDARD:API “SE/SF” or higher grade (Designed primarily for motor- cycles)

a

b

CAUTION:

●Do not add any chemical additives or use oils with a grade of CD a or higher.

●Do not use oils labeled “ENERGY CON- SERVING II” b or higher. Engine oil also lubricates the clutch and additives could cause clutch slippage.

●Do not allow foreign materials to enter the crankcase.

5.Install:

● Dipstick

6.Start the engine and let it warm up for several minutes.

7.Turn off the engine and inspect the oil level once again.

NOTE:

Wait a few minutes until the oil settles before inspecting the oil level.

ENGINE OIL REPLACEMENT

1.Start the engine and warm it up for sev- eral minutes and wait for five minutes.

2.Place the machine on a level place and hold it on upright position by placing the suitable stand under the engine.

3.Place a suitable container under the engine.

4.Remove:

●Dipstick 1

●Drain bolt (with gasket) 2 Drain the crankcase of its oil.

3 - 6