INSP

SPARK ARRESTER CLEANING (For USA) ADJ

6. Install:

● Tappet cover (intake side) 1

18 Nm (1.8 m · kg, 13 ft · lb)

T.

R.

● O-ring 2 New

NOTE:

Apply the lithium soap base grease on the O-ring.

7. Install:

● Tappet cover (exhaust side)

18 Nm (1.8 m · kg, 13 ft · lb)

T.

R.

● O-ring New ● Spark plug

13 Nm (1.3 m · kg, 9.4 ft · lb)

T.

R.

● Timing plug

7 Nm (0.7 m · kg, 5.1 ft · lb)

T.

R.

● Crankshaft end cover

7 Nm (0.7 m · kg, 5.1 ft · lb)

T.

R.

NOTE:

Apply the lithium soap base grease on the O-ring.

8. Install:

● Air filter case

● Air scoop (right)

SPARK ARRESTER CLEANING (For USA)

WARNING

●Be sure the exhaust pipe and muffler are cool before cleaning the spark arrester.

●Do not start the engine when cleaning the exhaust system.

a

1.

Remove:

 

3

● Bolt (tailpipe) 1

 

2.

Remove:

 

 

● Tailpipe 2

 

 

Pull the tailpipe out of the muffler.

2

3.

Clean:

 

● Spark arrester

 

 

 

 

Use a wire brush to remove any carbon

1

 

deposits from the spark arrester portion

 

 

of the muffler body 3 inner surface.

 

 

Tap the tailpipe lightly and remove the

 

 

carbon deposits from the outside por-

 

 

tion a of the tailpipe.

 

4.

Install:

 

 

● Tailpipe

 

 

Insert the tailpipe into the muffler and

 

 

align the bolt hole.

 

 

● Bolt (tailpipe)

7 Nm (0.7 m · kg, 5.1 ft · lb)

T.

R.

3 - 10