GEN

CONTROL FUNCTIONS INFO

EC150000

CONTROL FUNCTIONS

“ENGINE STOP” SWITCH

Make sure that the engine stop switch 1 is positioned to “”. The engine stop switch has been equipped to ensure safety in an emergency such when the machine is up set or trouble takes place in the throttle system. The engine will not start or run when the engine stop switch is turned to “”.

SHIFT PEDAL

The gear ratios of the constant-mesh 3 speed transmission are ideally spaced. The gears can be shifted by using the shift pedal 1 on the left side of the engine.

WARNING

When starting out on the machine, shift the transmission into 1st after pulling in the front brake lever and closing the throttle grip.

KICK STARTER

WARNING

Before starting the engine, be sure to shift the transmission into neutral.

Rotate the kick starter 1 away from the engine. Push the starter down lightly with your foot until the gears engage, then kick smoothly and forcefully to start the engine.

EC155001

THROTTLE GRIP

The throttle grip 1 is located on the right han- dlebar; it accelerates or decelerates the engine. For acceleration, turn the grip toward you; for deceleration, turn it away from you.

1 - 9