CYLINDER HEAD ENG

CAUTION:

.Do not turn the crankshaft during installation of the camshaft. Damage or improper valve timing will result.

●Remove the safety wire from the timing chain.

4.Install:

●Washer

●Bolt 1

NOTE:

Install the bolt with a wrench.

T.R.

20 Nm (2.0 m · kg, 14 ft · lb)

1while holding the rotor nut

5.Install:

● Timing chain tensioner

Installation steps:

●Remove the tensioner cap bolt 1 and spring 2.

●Release the timing chain tensioner one- way cam 3 and push the tensioner rod 4 all the way in.

●Install the tensioner with a new gasket 5 onto the cylinder.

T .

R .

Timing chain tensioner bolt: 10 Nm (1.0 m • kg, 7.2 ft • lb)

●Install the spring 2 and cap bolt 1.

●Tighten the bolt (with gasket) to the speci- fied torque.

T .

R .

Cap bolt:

8 Nm (0.8 m • kg, 5.8 ft • lb)

6.Check:

●Rotor “I” mark

Align with the crankcase stationary pointer.

●Valve clearance

Out of specification → Adjust.

Refer to the “VALVE CLEARANCE ADJUSTMENT” section in CHAPTER 3.

4 - 12