CHAPTER2 Ethernet Unit

2-4-2 Setting the IP address

This following explains how to set the IP address.

The IP address is a number unique to each device and identifies that device from among many other devices connected on the network. The IP address of one device must not be the same number as another device so use caution when setting the IP address.

1)Press F3 (SYS) on the initial menu screen.

2)Press F4 (next) to switch the function display and then press F2 (OPT).

3)Press F4 (next) again and then press

F1 (IP).

4)The currently set IP address is now dis- played. To change it, enter the new IP address with the number pad keys. (To move the cursor to right and left between periods, use the XZ + or XZ - keys.)

When completely finished making the new IP address entry, press the key.

5)The screen returns to the previous display in step 4.

[MENU] select menu

1EDIT2OPRT3SYS 4MON

[SYS] select menu

1SAFE2OPT 3UTL 4next

[SYS-OPT] select menu

1IP 2MASK3GWAY4next

[SYS-OPT-IP] IP address

= 192.168. 0. 2

[SYS-OPT-IP] IP address

= 133.210.201.100

12

Page 18
Image 18
Yamaha SRCD, ERCX, DRCX, SRCX user manual Setting the IP address, This following explains how to set the IP address