Yamaha DRCX, ERCX, SRCD, SRCX user manual Setting the gateway

CHAPTER2 Ethernet Unit

2-4-4 Setting the gateway

The following explains how to set the gateway. Basically this is specifying the router IP address. The router is a device relaying information from a certain network to a different network when two or more networks are present.

1)Press F3 (SYS) on the initial menu screen.

2)Press F4 (next) to switch the function display and then press F2 (OPT).

3)Press F4 (next) again and then press

F3 (GWAY).

[MENU] select menu

1EDIT2OPRT3SYS 4MON

[SYS] select menu

1SAFE2OPT 3UTL 4next

[SYS-OPT] select menu

1IP 2MASK3GWAY4next

4)The currently set gateway is now dis- played. To change it, enter the new gate- way with the number pad keys. (To move the cursor to right and left between peri- ods, use the XZ + or XZ - keys.)

When completely finished making the gateway entry, press the key.

[SYS-OPT-GWAY] gateway

= 192.168. 0. 1

5)The screen returns to the previous display

in step 4.	[SYS-OPT-GWAY]
	gateway
	= 133.210.201. 1

15