Trouble recovery

correct before attempting to start the en- gine. Any wrong connection could damage the electrical system.

(4)Start the engine, and then disconnect the jumper cables by reversing the steps

above.

ECJ00480

CAUTION:

●Never push the start switch while the en- gine is running.

●Do not operate the start switch for more than 5 seconds, otherwise the battery will be discharged and the engine will not start. Also, the starter motor could be damaged. If the engine does not start in 5 seconds, release the start switch, wait 15 seconds, and then try again.

EJU36990

Replacing the fuses

The fuses are located in the electrical box. To replace a fuse:

(1)Remove the seats. (See page 30 for seat removal and installation procedures.)

(2)Remove the electrical box cover.

1

1Electrical box cover

(3)Remove the cap on the electrical box.

(4)Replace the blown fuse with the spare fuse of the correct amperage by using the fuse puller on the reverse side of the cap.

1

3

4

2

1Electrical box

2Cap

3Fuse

4Spare fuse

1Fuse puller

Fuse amperage: Battery fuse:

30 A

Main relay drive fuse: 10 A

Electronic throttle valve fuse: 10 A

Security system fuse:

3A

Main fuse:

20A

108