Features and functions

NOTE:

The no-wake mode is also deactivated when the engine is stopped.

EJU37021

Cruise assist

The cruise assist is a function for maintaining a desired engine speed within a fixed range while operating the watercraft.

Activating and deactivating the cruise assist

Activation of the cruise assist will be confirmed by the beeper and the digital speedometer display.

Number

Cruise assist opera-

Digital

speedome-

of beeps

tion

ter display

 

 

 

 

 

 

Activated

Starts

 

flashing

 

 

 

 

 

 

Deactivated

Stops

 

flashing

 

 

 

 

 

 

Engine speed in-

Continues

 

creases or decreases

flashing

 

 

 

NOTE:

The beeps and the flashing digital speedometer display also indicate the activation of the no-wake mode. (See page 42 for more infor- mation.)

To activate the cruise assist:

(1)Operate the throttle lever until the desired engine speed is reached.

NOTE:

●The cruise assist can only be set between engine speeds of approximately 3000 r/min and approximately 7000 r/min.

●The cruise assist cannot be activated in the low-RPM mode. (See the items in 42 for op- eration mode information.)

(2)Once the engine speed reaches the de- sired cruise assist setting, push the “SET”

switch. When the cruise assist is activat- ed, the beeper sounds three times quickly and the digital speedometer display starts flashing. To keep the cruise assist activated, be sure to keep the throttle lever squeezed further than the position at which the cruise assist was set; releasing the throttle lever will deactivate the cruise assist.

NOTE:

The digital speedometer display flashes continually while the cruise assist is activated. Make sure that the beeper has sounded and the digital speedometer display is flashing before squeezing the throttle lever to the full throttle position. If the speedometer display is not flashing, the cruise assist is not activated

44