Features and functions

Number

No-wake mode oper-

Digital

speedome-

of beeps

ation

ter display

 

 

 

 

 

 

Activated

Starts

 

flashing

 

 

 

 

 

 

Deactivated

Stops

 

flashing

 

 

 

 

 

vated, the beeper sounds three times quickly and “5” (when miles are selected) or “8” (when kilometers are selected) starts flashing in the digital speedometer display. Keep the throttle lever in the idle position when the no-wake mode is acti- vated.

NOTE:

The beeps and the flashing digital speedometer display also indicate the activation of the cruise assist. (See page 44 for more informa- tion.)

To activate the no-wake mode:

NOTE:

The digital speedometer display flashes continually while the no-wake mode is activated.

NOTE:

The no-wake mode cannot be activated immediately after starting the engine. After starting the engine, wait for 5 seconds or more before activating the mode.

(1)Release the throttle lever.

(2)Check that the shift lever is in the forward position.

1

1

1“NO-WAKE MODE” switch

2

1Shift lever

2Forward position

NOTE:

The no-wake mode cannot be activated when the shift lever is in the reverse position.

(3)Push and hold the “NO-WAKE MODE” switch. When the no-wake mode is acti-

To deactivate the no-wake mode:

Perform one of the following procedures. The beeper sounds two times quickly and the digital speedometer display stops flashing when the no-wake mode is deactivated.

●Push the “NO-WAKE MODE” switch.

●Squeeze the throttle lever.

43