Features and functions

“RPM” indicator light comes on when the analog tachometer is selected.

1“Speed/RPM” button

2“SPEED” indicator light

3“RPM” indicator light

NOTE:

The “SPEED” indicator light blinks three times, then comes on, if miles are selected as the display units when the analog speedome- ter/tachometer is switched to the speedometer function.

Analog speedometer

The analog speedometer shows the water- craft speed against water.

The large inner numbers on the meter show the watercraft speed in miles per hour (mph) and the small outer numbers show the speed in kilometers per hour (km/h) when the speedometer function is selected.

Analog tachometer

The analog tachometer shows the engine speed.

The large inner numbers on the meter show the engine speed (100 r/min) when the tachometer function is selected.

EJU36800

“SPEED” indicator light

The “SPEED” indicator light comes on when the analog speedometer is selected.

1“SPEED” indicator light

The “SPEED” indicator light blinks three times in the following instances:

The analog speedometer/tachometer is switched to the speedometer function when miles are selected as the display units.

The display units of the multifunction infor- mation center are switched to miles from ki- lometers.

Miles are selected as the display units when the multifunction information center starts

operating.

EJU34960

“RPM” indicator light

The “RPM” indicator light comes on when the analog tachometer is selected.

1“RPM” indicator light

47