Operation

(3)Attach the engine shut-off cord to your left wrist, and then attach the clip to the en- gine shut-off switch.

(4)Push the start switch (green button), and then release it as soon as the engine starts to run.

1

3

2

1Clip

2Engine shut-off switch

3Engine shut-off cord

EWJ00580

WARNING

Check that the engine shut-off cord is not frayed or broken, and keep it free from the handlebars so that the engine stops if the operator falls off. The engine shut-off cord may not pull free if wrapped around the handlebars when the operator falls off, allowing the watercraft to continue to run and cause an accident.

NOTE:

It is not possible to start the engine with the clip removed from the engine shut-off switch.

NOTE:

The engine will not start if the throttle lever is squeezed.

ECJ00480

CAUTION:

●Never push the start switch while the en- gine is running.

●Do not operate the start switch for more than 5 seconds, otherwise the battery will be discharged and the engine will not start. Also, the starter motor could be damaged. If the engine does not start in 5 seconds, release the start switch, wait 15 seconds, and then try again.

73