Features and functions
EJU35122
Oil pressure warning indicator
If the oil pressure does not rise to specifica- tion, the “WARNING” indicator light and the oil pressure warning indicator begin to blink, and the buzzer sounds intermittently. At the same time, the engine speed is limited to help prevent damage.
If this occurs, reduce the engine speed, return to shore, and then check the engine oil level. (See page 63 for engine oil level checking procedures.) If the oil level is low, add enough engine oil to raise it to the proper level. If the oil level is sufficient, have a Yamaha dealer check the watercraft.
NOTE:
Press any button on the multifunction information center to stop the buzzer.
EJU36820
Engine overheat warning indicator
This model is equipped with an engine overheat warning system.
If the engine starts to overheat, the “WARNING ” indicator light and the engine overheat warning indicator blink, and then come on. The buzzer also begins to sound intermittent- ly, and then it sounds continuously. After the light and indicator start to blink and the buzzer
sounds, the engine speed is limited to help prevent damage.
If this occurs, immediately reduce the engine speed, return to shore, and then check for water discharge at the port (left) cooling water pilot outlets while the engine is running. If there is no discharge of water, shut the engine off, and then check the intake grate and impeller for clogging.
EWJ00050
WARNING
Before attempting to remove weeds or debris from the intake grate or impeller, shut the engine off and remove the clip from the engine
51