Operation

tween the minimum and maximum level (5)

Remove the engine oil filler cap.

marks.

 

 

 

 

1

 

1

 

 

1 Engine oil filler cap

1 Dipstick

(6)

Pour engine oil into the filler hole. Wait

 

approximately 5 minutes until the engine oil settles.

2

1

NOTE:

The difference between the minimum and maximum level marks on the dipstick is equal to approximately 1 liter of engine oil.

(7)Repeat steps 3–6 until the engine oil is at the proper level.

(8)Install the engine oil filler cap, and then

1Maximum level mark

2Minimum level mark

(4)If the engine oil level is below the mini- mum level mark, perform steps 5–7 to add enough oil so that the oil level is be- tween the minimum and maximum level marks on the dipstick. If the engine oil lev- el is significantly above the maximum lev- el mark, have a Yamaha dealer service the watercraft.

install the seats.

EJU32420

Water separator

Check the water separator for water. The water separator retains any water that may have entered through the fuel tank breather hose if

64