Features and functions
ponents for help and convenience in operating the watercraft.
1Analog speedometer/tachometer and indi- cator lights
2Left multifunction display and operation but- tons
3Right multifunction display and operation buttons (for FX Cruiser SHO)
ECJ00072
CAUTION:
Do not run the engine for more than 15 seconds without supplying water or over 4000 r/min when checking the operation of the meter on land, otherwise the engine could overheat.
NOTE:
●When the multifunction information center starts operating, the analog speedome- ter/tachometer makes one sweep, all dis- plays light up for 2 seconds, and then the meter starts to operate normally.
●The multifunction information center will continue to operate for 25 seconds after the engine stops.
EJU34930
Analog speedometer/tachometer and indicator lights
This watercraft is equipped with the following meter and indicator lights.
1Analog speedometer/tachometer
2“SPEED” indicator light
3“WARNING” indicator light
4“RPM” indicator light
5“UNLOCK” indicator light
6
EJU36790
Analog speedometer/tachometer
The analog speedometer/tachometer can be used as a speedometer or a tachometer.
To switch between the speedometer and the tachometer functions, push the “Speed/RPM” button for at least 1 second when the multi- function information center is operating.
The “SPEED” indicator light comes on when the analog speedometer is selected. The
46