Features and functions
The following operation buttons are on the right side of the multifunction information cen- ter.
ating, or if the display units are switched to miles/gallons/degrees Fahrenheit.
1“Mode/Reset” button
2“Start/Stop” button
To switch the display mode, push the “Mode/Reset” button for less than 1 second. The display mode changes in the following or- der.
Compass → Average speed → Tripmeter → Trip timer → Fuel consumption per hour → Fuel consumption per kilometer/mile → Water temperature → Air temperature
NOTE:
●To switch the display units between kilome- ters/liters/degrees Celsius and miles/gal- lons/degrees Fahrenheit, push the “Volt/Hour” button for at least 1 second, within 10 seconds after the multifunction in- formation center starts operating.
●The “SPEED” indicator light blinks three times if miles/gallons/degrees Fahrenheit are selected as the display units when the multifunction information center starts oper-
1“Volt/Hour” button
2“SPEED” indicator light
Compass
This display shows the current direction of the watercraft using the 8 major compass points.
NOTE:
The accuracy of the compass varies depending on the operating conditions. Use this function as a reference only.
53