Operation

(2)Board the watercraft from the side or the rear.

(3)Attach the engine shut-off cord to your left wrist, and then attach the clip to the en- gine shut-off switch.

(4)Grip the handlebars with both hands, place both feet on the floor of the footwell, start the engine, and then look in all direc-

tions before starting off.

EJU33110

Boarding and starting from a dock

(1)Board the watercraft from the side.

(2)Attach the engine shut-off cord to your left wrist, and then attach the clip to the en- gine shut-off switch.

(3)Push the watercraft away from the dock, grip the handlebars with both hands, place both feet on the floor of the footwell, start the engine, and then look in all direc- tions before starting off.

EJU36080

Boarding and starting in deep water

EWJ01110

WARNING

●The operator and passengers should practice boarding in shallow water be- fore riding in deep water. Boarding in deep water requires more skill.

●The fatigue and exposure that could re- sult after unsuccessful attempts to get back on the watercraft may increase the risk of injuries and drowning.

EJU36350

Boarding alone

(1)Swim to the rear of the watercraft and place both hands on the boarding plat- form, pull yourself up, and then grasp the handgrip with one hand.

(2)Pull yourself up to a kneeling position on the platform, and then move to the seat and sit astride.

(3)Attach the engine shut-off cord to your left wrist, and then attach the clip to the en- gine shut-off switch.

(4)Grip the handlebars with both hands, place both feet on the floor of the footwell,

77