Yamaha LS9-16, LS9-32 4, 5, 6, 7, 8, 9

102

Inserting an external device into a channel

LS9-16/32 Owner’s Manual

EOutput port select popup button

FInput port select popup button

These buttons select the output port and input port that

are patched to insert-out and insert-in. The currently

selected output port and input port are shown.

GINSERT ON/OFF button

This button turns the insert on/off. To switch this on/

off, move the cursor to this button and use the [DEC]/

[INC] keys or the [ENTER] key.

4Move the cursor to the output port select

popup button, and press the [ENTER] key.

The OUTPUT PORT SELECT popup window will

appear, allowing you to select the output port that will

be patched to insert-out.

1Category tab

These tabs select the output ports that are shown in the

popup window. Each tab corresponds to the following

output ports.

●SLOT {1/2}

Shows output channels 1–16 of the slot(s) {1/2}.

●RACK

Shows the inputs of racks 1–8. Use these when you

want to insert a GEQ or effect into that channel.

BPort select button

This selects the output port that is assigned to insert-

out.

5Use the category tabs and the port select

buttons to select the insert-out port.

6Move the cursor to the CLOSE button and

press the [ENTER] key to return to the pre-

vious screen.

7Move the cursor to the input port select

popup button, and press the [ENTER] key.

The INPUT PORT SELECT popup window will

appear, allowing you to select the input port that will

be patched to insert-in.

1Category tab

These tabs select the input ports that are shown in the

popup window. Each tab corresponds to the following

input ports.

●SLOT {1/2}

Shows input channels 1–16 of the slot(s) {1/2}.

●RACK

Shows the outputs of racks 1–8. Use these when

you want to insert a GEQ or effect into the chan-

nel.

BPort select button

This selects the input port that is assigned to insert-in.

8Use the category tabs and the port select

buttons to select the insert-in port.

9Move the cursor to the CLOSE button and

press the [ENTER] key to return to the pre-

vious screen.

Move the cursor to the insert point select

box, and use the dial or the [DEC]/[INC]

keys to select the insert point.

You can select PRE EQ (immediately before the EQ)

or PRE FADER (immediately before the fader).

Move the cursor to the INSERT ON/OFF but-

ton, and press the [DEC]/[INC] keys or the

[ENTER] key to turn it ON.

This enables the insertion you speciﬁed.

LS9-16

• After moving the cursor to the insert-out patch select box in

step 4, you can also select the output port by using the dial or

the [DEC]/[INC] keys instead of pressing the [ENTER] key.

HINT

LS9-16