182
Using program changes to recall scenes and library items
LS9-16/32 Owner’s Manual
9To change the event assignment for each
program number, move the cursor to the
popup button for the corresponding event
in the list, and press the [ENTER] key.
The PROGRAM CHANGE EVENT popup window
will appear. In this window you can specify the event
assigned to each program number. This popup window
contains the following items.
1TYPE field
Select the type of event.
The following table lists the events you can select.
BLIBRARY NAME field
Select the number and title of the scene or library item
to recall. If you selected SCENE in the TYPE field,
this shows the scene number and its title. If you
selected RACK 5–8, this shows the library number
and its title.
10
Use the TYPE field to select the type of
event you want to assign, and use the
LIBRARY NAME field to select the scene/
library number that will be recalled.
To select an item, use the dial or the [DEC]/[INC]
keys. Move the cursor to the OK button and press the
[ENTER] key to finalize the changes and close the
PROGRAM CHANGE EVENT popup window.
11
Assign events to other program numbers in
the same way.
With these settings, executing the specified event on
the LS9 will cause the corresponding program change
(or bank select + program change) message to be
transmitted to the external device.
When an external device transmits a program change
(or bank select + program change) message on the
appropriate channel, the event assigned to that pro-
gram number of the corresponding MIDI channel (or
bank number) will be executed.
Item Content
NO ASSIGN No assignment
SCENE Scene memory recall operations
RACK 5–8 Effect library recall operations for racks 5–8
(only if an effect is mounted)
21
•You can use the CLEAR ALL button to erase all assignments
to program numbers. The INITIALIZE ALL button will return all
program number assignments to their default state.
Assignments to program numbers are maintained as settings
for the entire system, rather than for individual scenes.
HINT
• In Single mode, if the same event is assigned to more than
one program number on a Tx channel, only the lowest pro-
gram number will be transmitted. (If the BANK button is on,
only the program number of the lowest bank number will be
transmitted.)
In Multi mode, if the same event is assigned to more than one
MIDI channel and more than one program number, only the
lowest program number on each MIDI channel will be trans-
mitted.
NOTE