Yamaha LS9-16, LS9-32

Functions that can be assigned to user-defined keys

258 LS9-16/32 Owner’s Manual

PAGE CHANGE

PAGE BOOKMARK —

When storing a page:

Flash

When showing a

memorized page:

Blink

When not showing a

memorized page: Lit

Not memorized:

Dark

Memorize the currently selected screen (hold down the

key for two seconds or longer), or display the last-memo-

rized screen (press and release the key within two sec-

onds). Popup windows can also be memorized. In the case

of a rack, the number of that rack is also memorized.

CLOSE POPUP — Flash Close the displayed popup window

CH SELECT INC, DEC — Flash Increment/Decrement the channel selection

SET BY SEL

SET [+48V] —

While pressing: Lit Hold down this key and press SEL to switch it on/off. Dur-

ing this time, the [SEL] LED will be lit if on or dark if off.

SET [Ø] —

SET [PRE SEND] —

SET [TO STEREO] —

SET [TO MONO] —

SET [TO LCR] —

SET [INSERT ON] —

SET [DIRECT OUT] —

SET DEFAULT

VALUE —— While pressing: Lit

Hold down this key and press the SELECTED CH encoder

to return to the default value. You can also return to the

default value by moving the cursor to the knob or fader in

the LCD screen, then holding down this key and pressing

the [ENTER] key.

SET NOMINAL

LEVEL —— While pressing: Lit

While holding down this key, press a [SEL] key to set the

fader of that channel to nominal level. You can also push a

SELECTED SEND encoder to set the send level to nominal

level. You can also return to nominal level by moving the

cursor to the knob or fader in the LCD screen, then hold-

ing down this key and pressing the [ENTER] key.

SENDS ON FADER MIX1–16, MATRIX1–

8—Blinks in SENDS ON

FADER mode

Recall the Sends On Fader function to the selected MIX or

MATRIX

GEQ FADER ASSIGN — ON: lit, OFF: dark Turn the GEQ Fader Assign function on/off.

RECORDER

TRANSPORT

PLAY/PAUSE, STOP, FF/

Next, REW/Previous,

REC

Same as the indica-

tion for the corre-

sponding LCD

button

Recorder transport functions

AUTOREC While pressing: Lit

Shortcut function for STOP → REC → PLAY.

Recording will be initiated in a single action. If this is exe-

cuted during recording, the ﬁle being recorded will ﬁrst be

closed, and then recording will continue with a new ﬁle.

DIRECT PLAY Song title or ﬁle name

of audio ﬁles While pressing: Lit

Start playback of a speciﬁed audio ﬁle from the begining

only once.

The audio ﬁle to be played must be saved in the SONGS

folder within the YPE folder. Please note that you won’t be

able to specify a ﬁle that is in the root directory or another

folder. When you execute playback, the path in the TITLE

LIST screen will change to \YPE\SONGS\.

HELP — — ON: lit, OFF: dark Switch the Help function on/off

Function PARAMETER 1 PARAMETER 2 LED Explanation